Ball-Valve-products
PP-BALL-VALVE-FLAGE-END
Specification :
CONSTRUCTION : 3 piece design, Reinforced Ball, Teflon Seated, full bore
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : Flanged as per ANSI B 16.5 (150 #) & as per BS 10 (Table D/E/F) & DIN STD.
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
HDPE (HIGH DENSITY POLYETHLENE)
ISOTACTIC PP
PVDF (POLYVINYLIDENE FLUORIDE)
AVAILABLE SIZE : 1” to 4”
PP-FLOW-INDICATOR
Specification :
CONSTRUCTION : 3 piece design, Teflon Seated, full bore
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : Flanged as per ANSI B 16.5 (150 #) & as per BS 10 (Table D/E/F) & DIN STD.
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
HDPE (HIGH DENSITY POLYETHLENE)
ISOTACTIC PP
PVDF (POLYVINYLIDENE FLUORIDE)
AVAILABLE SIZE : 2” to 8”
PP-BUTTERFLY-VALVE-FLANGE END
Specification :
CONSTRUCTION : Single Piece Only
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : Flanged as per ASA 150 #
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
HDPE (HIGH DENSITY POLYETHLENE)
ISOTACTIC PP
PVDF (POLYVINYLIDENE FLUORIDE)
AVAILABLE SIZE : 2” to 8”
HDPE-BALL-VALVE-FLAGE-END
Specification :
CONSTRUCTION : 3 piece design, Reinforced Ball, Teflon Seated, full bore
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : Flanged as per ANSI B 16.5 (150 #) & as per BS 10 (Table D?E?F) & DIN STD.
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
HDPE (HIGH DENSITY POLYETHLENE)
ISOTACTIC PP
PVDF (POLYVINYLIDENE FLUORIDE)
AVAILABLE SIZE : 1” to 4”
PP-BALL-SCREW-END
Specification :
CONSTRUCTION : Ball type, Soft Seated
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : Screw End (BSP Thred)
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
HDPE (HIGH DENSITY POLYETHLENE)
ISOTACTIC PP
PVDF (POLYVINYLIDENE FLUORIDE)
AVAILABLE SIZE : 1” to 4”
PP-BALL-VALVE-FLANGED/THREDED
Specification :
CONSTRUCTION : Ball type, Soft Seated
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : Screw End (BSP Thred) Flange End
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
ISOTACTIC PP
AVAILABLE SIZE : 1” to 4”
TOP-ENTRY-BALL-VALVE
Specification :
CONSTRUCTION : Ball type, Soft Seated
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : THRED / PLAIN
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
AVAILABLE SIZE : 1/2” to 4”
SOLID-SEAL-BALL-VALVE
Specification :
CONSTRUCTION : Ball type, Soft Seated
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : THRED /PLAIN
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
AVAILABLE SIZE : 2” to 4”
UPVC BALL VALVE
Specification :
CONSTRUCTION : Ball type, Soft Seated
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
END CONNECTIONS : PLAIN
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
UPVC
AVAILABLE SIZE : 1/2” to 2”
PP-UNION-TYPE-BALL-VALVE
Specification :
CONSTRUCTION : Ball type, Soft Seated
DESIGN & MANUFACTURING STD. : As per Manufacturer’s Standard
THRED CONNECTION AS PER YOUR REQUIRED
AVAILABLE M.O.C. :
PP (POLYPROPYLENE)
AVAILABLE SIZE : 2” to 3”
FEATURES
- Valves are of three piece design, fitted with six set of metallic studs and nuts which contributes to their sturdy construction.
- Valves have full bore; thereby, allowing full 100% flow.
- Body and Stem seals are offered in various elastomers like EPDM, Neoprene, Hyplon, Butyl, Viton and also in PTFE for chemical resistance against most chemicals.
- Valves with PTFE seals are provided with steel ring inserts which gives better sealing and safety features.
- Steel inserts in stem and handle give more strength, sturdiness, longer life and better performance.
- Carbon black resists ultraviolet rays and prevents degradation of polypropylene in sunlight exposure.
- Available in screwed end connections also.
Size Range :
15 mm NB to 150 mm NB.Drilling :
As per all internationally accepted standards, such as BS, DIN, ASA 150 etc.Hydrostatic Test :
At 10 kg/sq.cm.g for Body and Seat..BILL OF MATERIAL
| No. | Part | Qty. | Material |
|---|---|---|---|
| 1 | Body | 1 | Iso. PP/PPH/PVDF/A. PP/A. HD |
| 2 | End piece | 2 | Iso. PP/PPH/PVDF/A. PP/A. HD |
| 3 | Ball | 1 | Iso. PP/PPH/PVDF/A. PP/A. HD |
| 4 | Stem | 1 | MS/SS304/SS316 insert moulded with Iso. PP/PPH/PVDF/A. PP/A. HD |
| 5 | Seat | 2 | PTFE |
| 6 | Body Seal 0 rings | 2 | EPDM/NEOPRENE /PTFE / VITON |
| 7 | Stem Seal 0 rings | 2 | EPDM/NEOPRENE /PTFE / VITON |
| 8 | Bearing | 1 | PTFE |
| 9 | Bearing | 1 | Iso. PP |
| 10 | Distance Piece | 1 | Iso. PP |
| 11 | Stud, Nut & Washer | - | MS / SS304/ SS316 |
| 12 | Stem Nut | 1 | MS / SS304/ SS316 |
| 13 | Nut Cap | - | Iso. PP |
| 14 | Handle | 1 | MS insert moulded with PP |
| 15 | Handle Cap | 1 | Iso. PP |